Image of Ex300/Ex600/Ex1200/Ex2000/Ex3000
Explosion proof agitator
Ex300/Ex600/Ex1200/Ex2000/Ex3000

Three-One Motor Ex TYPE: Ex300 is the first motor-driven pressure-resistant explosion-proof stirrer of Three-One Motor.
The ease of use, small size, and compact housing cultivated over many years have been reproduced as much as possible even with explosion-proof.
The birth of an explosion-proof agitator that can be used as is in the laboratory.

Features

・The stirring blades and shafts can be used as they are for abundant three-one motors.
・5-year free long-term warranty for peace of mind * Customer registration required
・Newly designed explosion-proof housing that does not leak to the outside even in the unlikely event of an explosion
・Unlike the air type, stirring operation is possible while watching the rotation speed.
・Equipped with a feedback function to protect the set rotation speed
・We have prepared 4 models that can handle a wide range of stirring.
・Adopted a powerful brushless motor without sparks
・During stirring work, the direction of rotation can be switched with a single switch.
・Measures have been taken to prevent noise that adversely affects other devices and to prevent malfunction even if noise is received.
・A current limiting circuit and a thermal protector protection device are provided to protect the overload of the stirring motor.

Feature image
Specifications
Ex300/Ex600/Ex1200/Ex2000/Ex3000
Explosion proof standard
EX db ⅡB T4 Gb (Explosion Proof)
Applicable dangerous place
1st place (ZONE1), 2nd place (ZONE2)
Apply
Ex300:高粘度用
Ex600:中高粘度用
Ex1200:中粘度用
Ex2000:中低粘度用
Ex3000:低粘度用
Rotation speed
Ex300:5~300rpm
Ex600:10~600rpm
Ex1200:20~1200rpm
Ex2000:35~2000rpm
Ex3000:50~3000rpm
Rated torque
Ex300:2.0N・m
Ex600:1.0N・m
Ex1200:0.5N・m
Ex2000:0.2N・m
Ex3000:0.15N・m
Motor
DC brushless motor class B insulation (130 ° C) 80W
Rotation control
Feedback control / forward / reverse switching (timer mode, manual)
Timer function
5,10,20,30,45,60sec Settings can be switched
Panel display
Rotation speed digital 4-digit, overload display Torque indicator (1 scale 20%)
Chuck
φ8mm stainless steel chuck (can be changed to collet type hand tightening chuck when ordering)
Safety device
Current limiting circuit, thermal protector: Motor coil temperature 90 ℃, safety cover
Power cord
3 types Captire cable 3m (3PNCT x 3 cores) Outer diameter: φ16mm Terminal: Round terminal R2-4 (Ground rubber plug for operation check included * Plug cannot be used in dangerous places)
Power supply / power consumption
Single-phase 100V ± 10% 50 / 60Hz shared 200VA
Dimensions / Weight
Body: W190mm x D394mm x H208mm / 5.1Kg (Internal power cord 2.1kg)
Accessories
Clamp holder (Type: 21 x 16) 1 piece, safety cover

For inquiries about our products, requests for catalogs, etc., please use this form.

REQUIRED
REQUIRED
REQUIRED
REQUIRED
REQUIRED

For catalog requests and product inquiries,
please contact us using the inquiry form.